Industrial Safety Is Not a Product. It Is a System of Work

 Industrial Safety Is Not a Product. It Is a System of Work.

 

Three Fatalities at Sandhar Technologies, Gurugram — A Larger Question for Industrial Management and Safety Professionals

 

HSE-RM SOLUTIONS | Professional Perspective | 13 November 2026

 


Three workers have lost their lives in an incident involving a tank at an automotive components facility in Gurugram. The investigation must establish what happened and who was responsible. For other industries, the immediate lesson is to examine how hazardous work is planned, authorised and controlled.

 

Adequate safety arrangements mean more than equipment. They mean a system that prevents people from facing hazards without effective protection.

 

The incident and what is currently known

News reports describe three worker deaths following an incident on 11 November 2026 at Sandhar Technologies in Dhumaspur, near Bhondsi, Gurugram, Haryana. The workers became unconscious in a tank described in reporting as a chemical tank. Other employees removed them and took them for medical treatment.

 

The Times of India reported maintenance-related entry and a complaint alleging inadequate safety arrangements. Bhondsi police registered an FIR against company management under Sections 106 and 3(5) of the Bharatiya Nyaya Sanhita. These are reported allegations under investigation. Registration of an FIR is not a finding of guilt.

 

The entry sequence remains uncertain. An earlier report described workers falling into the tank, while later reporting described workers being directed to enter. The exact task, tank contents, hazardous atmosphere and sequence must therefore be established from evidence.

 

No final technical investigation report was located in the sources reviewed through 13 November 2026. Those reports also do not confirm arrests. The discussion below sets out questions and safeguards for comparable work; it does not establish which controls were absent or ineffective at this facility.

 

Three families have suffered an irreversible loss. They deserve a thorough investigation and accountability based on evidence. Industry also has a responsibility to learn before another worker faces a similar danger.

 

1 Safety cannot be purchased as a complete solution

Equipment, instruments and technology can be essential to safety. The problem begins when purchasing them is treated as proof that the risk has been controlled.

 

A detector must suit the substances that could be present. A permit must reflect the actual task and conditions. A rescue system must match the space, the emergency and the competence of the people expected to use it. A dashboard must contain reliable information that leads to action.

 

Each product belongs within a larger system of work. That system must define what can go wrong, which controls are necessary, who is responsible and how the controls will remain effective.

 

What are we trying to prevent, and what must work reliably to prevent it?

That question should come before a purchase order. Once the risk is understood, equipment can be selected for a clear purpose and its performance can be checked.

 

2 Practical experience and modern engineering belong together

Experienced operators and maintenance personnel often know details that are missing from a procedure. They may know which line tends to block, which valve has passed in the past, where residue collects or how equipment behaves after a shutdown.

 

This knowledge should be captured and examined. It can improve the risk assessment, reveal differences between drawings and the actual plant, and help designers make controls easier to use.

 

Experience also has limits. A task may have been completed many times without an incident while a serious hazard remained present. Familiarity can make an unsafe condition seem normal.

 

Earlier generations of industry had valuable practical knowledge, but they also experienced serious accidents. Modern engineering, detection and protective systems provide benefits that should be retained. The useful approach is to combine operating experience with sound engineering, verified information and disciplined work methods.

 

Workers should be encouraged to ask why a condition has changed. Management should make sure those questions receive a competent response.

 

3 Understand the task before selecting the controls

A request to “clean the tank” or “carry out maintenance” is too vague to support a sound decision. The first step is to define the task, the equipment involved and the conditions under which the work will take place.

 

Before authorising work, establish:

  • What the tank contains now and what it contained previously.
  • Which residues, cleaning agents or reaction products could be present.
  • Whether a hazardous atmosphere could exist or develop.
  • Which pipes, pumps, agitators and energy sources connect to the tank.
  • Whether the work can be completed without entry or exposure at the opening.
  • What may change when the tank is opened, drained, cleaned or disturbed.
  • Who will assess, authorise, perform and supervise the task.
  • How people will withdraw and how rescue will be provided if needed.

 

The name of the industry does not identify the tank hazard. An automotive components factory may have several different processes and utilities. The specific tank service, chemicals and maintenance method must be established. A generic label such as “chemical tank” is not enough to select a detector, respirator or cleaning method.

 

Recognise the full range of hazards

Atmospheric hazards deserve close attention, but the assessment must also consider unexpected inflow, chemical contact, moving equipment, stored energy, heat, falls and difficult access where relevant. Exposure can occur at an opening as well as during entry.

 

Assess a credible event, rather than writing only “confined-space risk.” For example: a person approaches an open tank, encounters a hazardous atmosphere and collapses. Another scenario may involve liquid entering through a connected line during internal work. Each scenario needs controls that address its own cause and consequences.

 

Give potential fatalities the attention they require

Consider severity, likelihood and exposure using the organisation’s approved assessment method. An infrequent task can still have fatal consequences. An unsupported assumption that failure is unlikely must not become permission to proceed with an uncontrolled hazard.

 

Missing information about a critical condition is a reason to resolve that uncertainty before authorisation. A proposed control should not reduce the recorded current risk until it has been implemented and verified.

 

Apply the hierarchy of controls

The preferred order is elimination, substitution, engineering controls, administrative controls and personal protective equipment. For tank maintenance, consider the following applications.

 

Control level

Application to consider

Elimination

Complete the task externally or redesign the arrangement so that entry is unnecessary. Assess hazards at the opening as well.

Substitution

Where technically feasible, use a less hazardous material or cleaning method. Check compatibility and any new risks.

Engineering controls

Provide suitable isolation, safe access, ventilation and other measures that control the identified hazards.

Administrative controls

Define competent authorisation, permits, supervision, communication, monitoring and stop-work conditions.

PPE

Select protection for the actual exposure and task. Confirm suitability, fit, training and maintenance.

 

Process isolation needs its own plan. Identify connected flows and stored energy, select an appropriate isolation arrangement and verify it. Stopping a pump or closing a single valve does not automatically establish safe isolation.

 

Rescue planning supports these controls; it is not another level in the hierarchy. Before exposure, establish a rescue arrangement suited to the particular space and foreseeable emergency. Consider non-entry retrieval where suitable and ensure trained, equipped responders can act within the time the hazard demands. Unprotected rescue entry can expose another person.

 

Where an essential safeguard is unavailable or cannot be verified, postpone the work. Budget and schedule constraints do not make an unsafe condition acceptable.

 

4 Observe the work and monitor the conditions that matter

A practical system must connect what people see, what instruments measure and what the team does next. HSE-RM SOLUTIONS describes this daily discipline as Observe, Monitor and Control.

 

Observe

Examine the actual workplace and task. Look at the tank openings, connected lines, access arrangements, nearby activities and the way people are preparing to work. Compare the physical arrangement with drawings and procedures.

Speak with the people doing the job. Ask them to explain the work sequence, the hazards and the conditions that would make them stop. If the explanation differs from the permit, resolve the difference before work begins.

 

Monitor

Select measurements from the hazard assessment. For a tank task, these may include oxygen concentration, flammable atmosphere readings, relevant toxic substances and ventilation performance. Isolation condition, connected operations and entry records also need appropriate checks.

 

Atmospheric testing must use equipment capable of detecting the contaminants that could be present. Confirm the instrument’s condition, calibration and required pre-use checks. Define the sampling locations, timing, instrument response time and acceptable conditions. Record what was measured, the results, the time, location and person responsible. “Gas test completed” is not a sufficient account of the condition.

 

A normal oxygen reading does not establish that the air is free of toxic substances. Likewise, a standard multi-gas detector does not detect every chemical. Competent assessment must determine what additional testing is needed.

 

Ventilation must use suitable clean air and avoid creating another exposure at its discharge. Never use oxygen to ventilate a confined space. Ordinary masks and air-purifying respirators do not supply oxygen. Respiratory protection must be selected for the atmosphere and used within a competent respiratory protection programme.

 

Control

The work team must know what each result requires them to do. The following are examples to build into a site-specific procedure:

Condition

Required decision

Tank contents or atmospheric hazards remain unresolved

Do not authorise entry until the assessment establishes the necessary controls.

Isolation cannot be verified

Keep the work stopped and resolve the isolation.

An alarm occurs, ventilation fails or conditions become unsafe

Withdraw as required by the procedure and reassess before re-entry.

Communication or required rescue readiness is lost

Suspend the entry and restore the required arrangements before reauthorisation.

The task or connected operation changes

Review the assessment and permit before continuing under changed conditions.

 

After corrective action, verify the result. At completion, account for people, close the permit and reinstate equipment through a controlled handover. Review recurring problems so that the next job benefits from what was learned.

 

This daily approach belongs within a wider cycle of planning, implementation, checking and review. Observe, Monitor and Control cannot replace that full management cycle.

 

5 Collect information that supports decisions

A facility may generate hundreds of permits, inspection forms and training records. Their value depends on the decisions they support.

 

For example, a monthly report showing “50 confined-space permits issued” describes activity. It does not show whether the tasks were safe.

 

More useful questions include:

  • How many tasks avoided entry after the work method was reviewed?
  • How many needed additional isolation or other safeguards?
  • Which tasks stopped because conditions were unsafe or uncertain?
  • What changed during work, and how did the team respond?
  • Which defects or deviations appeared repeatedly?
  • Were corrective actions completed and their effectiveness verified?

Interpret the results carefully. More reported stoppages may reflect better recognition of hazards and stronger use of stop-work authority. A target of zero stoppages could discourage the very decisions the system needs. Preventive information should be considered alongside incident data.

 

An example of using operational information

Consider a facility that repeatedly enters a process tank for cleaning. This is an illustrative example, not a finding about Sandhar Technologies.

 

The team records why entry is needed, where residue collects, the time spent cleaning, relevant atmospheric results and interruptions. A review may identify a suitable external cleaning arrangement or a design change that reduces the need for entry.

 

The proposed method must still be assessed. External cleaning can introduce hazards such as pressure, chemical exposure, moving equipment or unexpected discharge. Any improvement should demonstrate a reduction in the relevant risk without leaving new hazards uncontrolled.

 

The useful outcome is a justified decision about the work method. A larger spreadsheet or a more attractive dashboard is valuable only if it helps the team reach and implement that decision.

 

6 Work within constraints without weakening essential safeguards

Safety professionals need to understand the organisation’s operating and financial limits. They also need to identify which conditions must be met before work can proceed.

 

A useful recommendation explains:

  • The hazard and credible consequence.
  • The existing controls and evidence of their condition.
  • The critical gaps and immediate operating restrictions.
  • The options available to reduce the risk.
  • The resources, competence and maintenance each option needs.
  • The person responsible, completion date and verification method.

 

This gives management a basis for deciding where to invest. Some improvements may involve changing the work method, improving scheduling, clarifying responsibility or completing overdue maintenance. Others require engineered modifications, suitable instruments, ventilation or specialist rescue capability.

 

Compare options that can meet the required safety standard. Include installation, training, maintenance, testing and replacement costs, as well as the purchase price. An apparently inexpensive option may be difficult to maintain or unreliable in actual use.

 

Cost optimisation means removing ineffective expenditure while providing the safeguards the work requires.

Where a permanent improvement takes time, competent people must decide whether a valid temporary arrangement can control the risk. If it cannot, restrict or stop the activity. A completion date in an action register does not protect someone doing the job today.

 

7 Select a solution for the actual facility

A product’s use at another large company can be useful background information. It does not establish suitability for every application.

 

Two factories making similar products may have different chemicals, tank arrangements, staffing, maintenance practices and exposure conditions. Their teams may also have different capacity to inspect, calibrate, repair and use the equipment.

 

Before adopting a system, ask:

  1. Which specific scenario will it prevent or control?
  2. Is that scenario relevant to our actual operation?
  3. Will the system work across our expected operating conditions?
  4. What training, maintenance and specialist support will it require?
  5. What happens if it loses power, fails or gives an uncertain result?
  6. How will we demonstrate that it performs as intended?
  7. Is there a simpler compliant option with equivalent or better protection?

 

A system should be understandable to the people who use it. Instructions should suit their language and literacy, and responsibilities should be clear during shift changes and contractor work.

 

Simpler administration can improve use. It must not remove a necessary test, isolation, authorisation or emergency arrangement. The aim is to make essential controls easier to apply correctly.

 

8 Management responsibility extends beyond procurement

Management must provide the conditions in which safe work can happen. That includes suitable engineering, competent people, maintenance resources, realistic schedules and authority to stop a task.

 

A signed permit or completed training register is useful evidence, but investigators must also establish what happened at the workplace.

 

Questions for a fair investigation

Investigation area

Questions to establish from evidence

Task and timeline

What work was planned, who assigned it and what happened before the first loss of consciousness? Did people enter, fall or approach an opening?

Process and atmosphere

What did the tank contain, what had recently changed and what could explain the exposure? What do samples, operating records and medical findings support?

Safeguards

Which controls were required, which were present and what evidence shows their condition and use?

Work organisation

Were roles clear, did the team have suitable resources and supervision, and could workers stop or question the task?

Emergency response

How was the alarm raised, how did recovery take place and were additional people exposed?

Earlier learning

Were similar tasks, defects, warnings or near misses previously recorded? What action followed?

 

Preserve evidence through the authorised investigation team once safe access is established. Compare witness accounts with permits, work orders, instrument records, isolation records, CCTV and process information where available. Readings taken after ventilation, draining or rescue may not represent the original conditions.

 

Examine alternative explanations. Do not infer that welding occurred merely because a worker’s trade was welder, or identify a gas solely because it is associated with some other tank incident.

 

Accountability and learning support each other when both follow evidence. An early label such as “human error” can leave important questions unanswered. The investigation must examine the decisions and conditions that made the action possible, while establishing individual and organisational responsibilities fairly.

 

Safety culture appears in everyday decisions

Culture is shaped by management choices, industry practices and the conditions in which people work. It includes whether defects receive attention, whether employees can raise concerns without fear, and whether a production deadline overrides a safety limit.

 

Workers have an important role in identifying problems, but they cannot be expected to compensate for unsuitable equipment, missing engineering controls or an unworkable plan. Safety professionals support this system; operational managers remain responsible for controlling the work within their roles.

 

9 How HSE-RM SOLUTIONS supports practical system development

At HSE-RM SOLUTIONS, we begin by understanding the operation and the risks it creates. We then help the organisation develop controls and work arrangements that its teams can use, maintain and verify.

 

Confined-space risk assessment

We review the task, potential atmospheres, connected systems, access and exposure routes. The assessment considers alternatives to entry, isolation needs, foreseeable changes and the conditions required before authorisation.

 

Maintenance and permit-to-work system review

We examine how work moves from planning to completion. This includes coordination between operations, maintenance, contractors and supervisors, as well as isolation, permit checks, monitoring, suspension and handover.

 

Emergency rescue preparedness and training

We assess foreseeable rescue scenarios, equipment suitability, responder competence and coordination. The aim is to establish practical readiness for the spaces and tasks involved, supported by appropriate training and exercises.

 

Operational information and safety system development

We help teams decide what information to collect, how to check its reliability and how to use it. Inspection and reporting should support clear decisions, assigned actions and verified completion.

 

Our BRMS and DRS service approach

Through our BRMS and DRS service models, professionals study day-to-day activities and collect relevant operational information. Technical and analytical teams then review that information to identify hazards, recurring deviations and opportunities for improvement.

 

The approach connects site observations with management decisions:

  1. Understand the work and identify the information needed.
  2. Collect and validate observations, measurements and operating records.
  3. Assess the risks and identify weaknesses in controls.
  4. Recommend priorities, responsibilities and practical improvements.
  5. Help the organisation establish follow-up and verification arrangements.

 

The intended output is a clear account of where serious risks exist, which actions need priority, and how the organisation can check progress. Recommendations should explain their safety purpose and resource needs before management commits to a solution.

 

10 Questions to ask before the next tank job

The Gurugram investigation must establish the actual cause and the adequacy of the arrangements at the site. Other organisations can review comparable tasks immediately without assuming that the same mechanism applies to them.

Before the next job, management and the work team should be able to answer:

  • Do we understand the tank’s contents, connections and credible hazards?
  • Have we assessed a method that avoids entry or reduces exposure?
  • Which conditions must be established and verified before work starts?
  • Who will monitor those conditions, and what results require action?
  • Can the team explain the stop-work and withdrawal criteria?
  • Is a suitable rescue arrangement ready for this task and shift?
  • Who can authorise restart after a change or interruption?

 

If a critical answer is missing, the next step is to resolve it before exposing people to the hazard.

These questions help turn a general commitment to safety into a decision that can be checked at the workplace.

 

Final perspective

Industrial safety depends on understanding the operation, anticipating credible failures and keeping effective controls in place. Equipment and documents support that work when their purpose is clear and their performance is verified.

 

A sound system gives people the information, resources and authority they need to act safely. It is understandable, technically reliable and maintainable throughout its use.

 

The objective is to make safety effective. Where the possible consequence is fatal, essential safeguards are not optional.

 

At HSE-RM SOLUTIONS, we help organisations build practical systems that connect hazard identification with daily operating decisions. The value of a safety investment lies in the protection it provides and its ability to keep providing that protection.

 

HSE-RM SOLUTIONS

Your Partner In Safety...

Comments

Popular posts from this blog

30 Identifying & Reporting

Chemical safety

29 Construction Safety Workday Plan